Jfopt Location: Jfopt > Products > Fiber Optic Active > Fiber Test Equipment >  Visual Fault Locator Light Source JFT-07

JFT-07 Optical Cable Visual Fault Locator

SKU: JFT-07
Click Times: 1999
Visual Fault Locator Light Source JFT-07
 Visual Fault Locator Light Source JFT-07 Detail:

MODEL:JFT-07
DIMENSION:100×50×25mm

JFT-07 Visual Fault Locator Light Source Specification

Visual Fault Locator Light Source Description:
Visual Fault Locator is a 650nm Laser Source with an output power of 1mW used in SM or MM fiber. Two AAA batteries support to work continually up to 30 hours. The special design for output port makes output adapter truly universal compared to other products. The locator has an FC adapter but it is very friendly to SC and ST connection without needing any other type of adapters.

JFT-07 is an ideal instrument for patch cord broken or bending, especially for fiber identification in ribbon or bunched optic fiber pigtails installation, in which identifying fiber from end to end may be troublesome or time-consuming

Visual Fault Locator Light Source Features:

  • Compact size
  • 1mW red bright laser locates fault up to 5km in fiber.
  • Locates breaks, Micro-bends even through jacketed fibers
  • End-to-end fiber identification
  • Mechanical fusion splice optimization


Application:
Telecommunication engineering and maintenance
CATV engineering and maintenance
Cabling system
Other optical fiber engineering

Specifications:

Output Power (mW) 1
Operating Wavelength (nm) 650
Spectral Width@20℃(nm) ±10
Fiber Mode SM、MM
Internal Modulation CW、2Hz
Output Adapter FC(versatile)
Battery Continuous Working Time (hours) 20~30
Power Supply (Battery) 2XAAA
Working Temperature(℃) -10~+40
Storage Temperature(℃) -20~+50
Dimensions(mm) 100X50X25
Weight(g) 50


 

 

 

 

 

 

 

 

 

 

 

 

Packages:

Visual Fault Locator………………………………………………..1
Manual……………………………………………………………..1
AAA battery…………………………………………………………..2
Cotton Swab………………………………………………………..1



Keys and Functions:
Output interface: allows connection to various fiber optical test
ON/OFF: Press to turn on or off.
Mode key: Press to choose the “CW” or “HZ”.


Maintenance
1. If the Visual Fault Locator is not used for a long time, the light output port must be protected with the dustproof hat.
2. When the Visual Fault Locator is used for a period of time, the output port maybe polluted. It results in the output power decreasing. So the connector must be cleaned with alcohol. If it couldn't be cleaned, please send it to the manufacturer.
3. Once not using for a long time, please take out the battery.



Trouble-shooting

Number Problem cause Method
The output light is weak. Please replace the battery.
2 1 Output power is fluctuating. After warm-up for 15 minutes, then operate it.
Related Products
Jfopt | About us | Products | News | Jobs | Sitemap | Certification
CopyRight©Shenzhen Jiafu Optical Communication Co., Ltd  Powered by: Fiber Optic Cable Fiber cable supplier