Fiber optic patch cord, Fiber optic patch panel Manufacturer Since 2001
Jfopt Location: Jfopt > Products > Fiber Optic Passive > Fiber Optic Patch Panel >  Mini terminal box

Mini terminal box JFOPP-TAU1111NXXY012

Click Times: 501
Mini terminal box
 Mini terminal box Detail:

  Mini terminal box JFOPP-TB12AB


    JFOPP-TB12AB terminal box is designed for wall installation and also suitable other application environment. Its compact size and light weight is ideal for the occasion request small capacity. It is suitable for cable with diameter (Φ) less than 15mm


    • All property indexes are in accordance with National YD/T814-1996 Standard
    • The body makes use of cold rolling steel, and the surface use the technique of dim blowing plastic and it is with strong adhesive force, artistic and durable
    • With adapter output: design of 1-2 cable entrance and 12 ports for SC.
    • LC, ST and FC D type adapter
    • Cable entrance and fiber exit are sealed with oil resistance NBR to increase the flexibility. Users can choose to prick the entrance and exit
    • Convenient and safe

    Technical Data:

    • Sheet Metal Thickness: 1.0mm
    • Optical fiber winding radius: ≥40mm
    • Extra loss of fiber tray: none
    • Fiber length left in tray: ≥1.6m
    • Fiber capacity: max 12 cores
    • Working temperature: -20 °C~+70°C
    • Lateral pressure-resistance: 500N
    • Shock-resistance: 750N
    • Insulation resistance≥1000MΩ between grounding system and metal parts of cabinet, testing current: DC 500V
    • Enduring of high voltage: 3000V (DC) /5min, no penetration, no arcs


    • Peel the cable, take off the outer and inner housing, as well as loose contract tube,and wash off the filling grease, leaving 1.1~1.6m fiber and 20~40mm steel core
    • Fix the cable-pressing card and the cable, as well as the cable reinforce steel core
    • Lead the fiber into the melting and connecting tray, fix heat contract tube and melted tube to one of the connecting fiber. After melting and connecting the fiber move heat contract tube and melted tube and fix the stainless (of quartz) reinforce core stick. Make sure the connecting point is the middle of the housing pipe. Heat the pipe to make the two into one. Put the protected joint into the fiber-laying tray.(One tray can lay 12 cores)
    • Lay the left fiber in the melting and connecting tray evenly, and fix the winding fiber with nylon ties. Use the trays from the bottom up. After all the fiber has been connected, cover the top layer and fix it
    • Position it and use the earth wire in accordance with the project plan
    • Close the cover. It can be installed on the wall or in horizontal line
Related Products
Jfopt | About us | Products | News | Jobs | Sitemap | Certification
CopyRight©Shenzhen Jiafu Optical Communication Co., Ltd  Powered by: Fiber Optic Cable Fiber cable supplier