Add: 2Floor, Building A, Huilongda Industrial Park, Shuitian Community, Shiyan Street, Bao'an District, Shenzhen City, Guangdong Province, China
Tel: 0086 - 755 - 83570641
Fax: 0086 - 755 - 83570649
Fiber optic pigtail Specifications
Types: single mode, multimode
Terminations: FC, SC, ST, MU, LC, D4, DIN, E2000, MT-RJ, MPO, SMA, E2000, FDDI, and ESCON
Insertion Loss (dB): less than 0.2 (PC and UPC)
Exchangeability: less than 0.2 dB
Tensile Strength: less than 0.2 dB (0 to15 kgf)
Temp. Range: (- 40 to +80 degree centigrade)
Fiber optic pigtails description
If you cut a piece of fiber optic patch cable into two parts, it becomes two pieces of fiber optic pigtails. fiber optic pigtails is a piece of fiber optic cable with fiber connectors on one side of the cable, the other side is used usually for melting with other fiber optical cables. Usually fiber optic pigtails are 0.9mm cable diameter, because it is smaller size and fit for being put inside the fiber optic patch panel boxes or fiber optic splicing enclosures.
Waterproof fiber optic pigtail
Besides the commonly type fiber optic pigtails, we can also make it fan out structure with fiber optic fan out kit, and there is another waterproof fiber optic pigtails, this type fiber pigtails is with big diameter outdoor cable, with waterproof fiber optic connectors installed on it, usually used in harsh environment. They are made according to IEC standards, the products feature low insertion loss, high return loss, good interchangeability and repeat push-pull performance.