Illustrate how to achieve the conversion from electric signal to optical signal by media converter
1.Outdoor cable
2.Media converter
3.Fiber optical jumper
4.Fiber optical distribution frame (ODF)
5.Copper cable
6.Fiber optical patch cord

Steps are listed as below
1.Splice the outdoor cable and optical pigtails in the ODF, and lead the optical signal indoor
2.Connect the media converter and the ODF by the fiber optical patch cord, lead the optical signal into media converter
3.The optical signal is converted by media converter to electric signal, and lead out through Ethernet port on media converter
4.The active equipment can be connected on the media converter through Ethernet port