Contact us

Add: 2Floor, Building A, Huilongda Industrial Park, Shuitian Community, Shiyan Street, Bao'an District, Shenzhen City, Guangdong Province, China

Tel: 0086 - 755 - 83570641

Fax: 0086 - 755 - 83570649

Jfopt Location: Jfopt > News > Fiber knowledge > How to use bare fiber adapter

How to use bare fiber adapter

Edit:   Date: 2019-01-14

Bare fiber adapter is mainly used for testing the fiber optical pigtail which is ended with bare fiber, or testing other fiber devices with bare fiber before they are linked into fiber optical system. JFOPT bare fiber adapter has different shapes, round type and square type, but the same use.

How to test by bare fiber adapter
1. Press tightly on the key of the adapter (the key is different shapes between round type fiber optic adapter and the square one), then insert the bare fiber into the adapter from the back till the bare fiber can be seen from the front of adapter. Then release the key.
2. Cut the extra fiber and make it even with the end face of the ferrule.
Then connect the bare fiber adapter to the testing equipment for testing.
Note: must do a very accurate job when cutting the extra fiber, for the bad cutting face of the fiber will exert very bad effect

Related News
JFOPT | About us | Products | News | Jobs | Sitemap | Certificate

Hot Products:Fiber optical patch cables    Fiber cable supplier    Fiber optical splice closure    Fiber optical patch panel    Fiber test equipment  

CopyRight©JFOPT CO.,LTD.  Powered by: Fiber Optical Cable Fiber cable supplier In China