Add: 2Floor, Building A, Huilongda Industrial Park, Shuitian Community, Shiyan Street, Bao'an District, Shenzhen City, Guangdong Province, China
Tel: 0086 - 755 - 83570641
Fax: 0086 - 755 - 83570649
Optical communication engineering wiring is inseparable from the optical cable joint box. The optical cable joint box is a connection part that connects two or more optical cables together and has a protective component. It is a very important equipment that must be used in the construction of optical cable lines. One is that the quality of the optical cable connector box directly affects the quality of the optical cable line and the service life of the optical cable line. So how to look at the quality of the fiber optic connector box? Are the installation steps of the fiber optic connector box complicated? Let us answer these two questions for everyone.
In order to ensure the quality of communication equipment and the safety of users, it is necessary to distinguish the difference between high-quality optical cable junction boxes and inferior optical cable junction boxes. Enhancing the quality of communication equipment such as optical fiber terminal boxes also brings certain security to users. Here's how to choose a high-quality fiber optic connector box:
First, check the material of the box.
The high-quality fiber optic connector box is injection molded from new material PC, which is corrosion-resistant and aging-resistant, has a long service life, and has a smooth and beautiful surface. The mechanical structure is durable and can withstand different climate changes and harsh working environments.
Second, check the suitability of optical cables.
The high-quality optical cable connector box is suitable for ribbon optical cables and ordinary optical cables. The internal fusion disk can be flipped according to the installation requirements, and there is enough space for the optical fiber disks.
Third, check the volume and capacity.
The high-quality optical cable connector box has a small volume and a large capacity, and can be installed with fixed modules of different adapters, which is convenient for installation and maintenance. Can be installed on walls and telephone poles.
Installation steps for fiber optic connector box
Remove the outer sheath of the optical cable, (if any, remove the shield and armor), and then remove each wrapping layer to expose the loose tube. For specific methods, follow the standard method steps recommended by the optical cable manufacturer, and prepare a length of 3 meters.
Clean the loose tube and the reinforced core sheath with a detergent, remove the excess filling tube, and polish the outer sheath of the cable with a length of 150mm.
Folding optical cable installation
Select the smallest inner diameter sealing ring according to the outer diameter of the optical cable, and put two sealing rings on the optical cable.
Put the optical cable into the corresponding entry hole.
Connect the shield and ground.
Wrap a self-adhesive sealing tape between the two sealing rings so that the sealing tape is wound flush with the outer diameter of the sealing ring to form a sealed end of the optical cable.
Press the sealed end of the optical cable into the optical cable into the hole.
Use a hose clamp to pass through the optical cable stiffener holder and cable core bracket, fix the optical cable on the base of the joint box, and tighten the hose clamp screws until the hose clamp is tightened.